IES Electronics Syllabus 2018 - IES Syllabus for ECE 2018 PDF
IES Electronics Syllabus 2018 – IES Syllabus for ECE

Syllabus for Electronics and Telecommunication Engineering

Here, you will get both Prelims and Mains syllabus of Civil Engineering. You can also download the pdf file from the download link given at the bottom of the page. The syllabus has been divided into two parts. In the Prelims Exam (Stage 1), Questions will be from both Parts 1 and 2 and the pattern of the questions will be of Objective type. In the Mains(Stage 2) exam, questions will be from part 2 only and the pattern of question will be subjective based.  2018 –

1. APTITUDE PAPER (Stage-I, Paper-I). Common to all Candidates

General Studies and Engineering Aptitude

The questions from the following Topics will be set in Paper-I of Stage-I (Objective type, 2 hours duration, 200 Marks maximum)

IES Exam Date 2018 GATE Cutoff for M.Tech Admission in IITs & NITs IES 2018 Changed Syllabus
  1. Current issues of national and international importance relating to social, economic and industrial development
  2. Engineering Aptitude covering Logical reasoning and Analytical ability
  3. Engineering Mathematics and Numerical Analysis
  4. General Principles of Design, Drawing, Importance of Safety
  5. Standards and Quality practices in production, construction, maintenance and services
  6. Basics of Energy and Environment: Conservation, environmental pollution and degradation, Climate Change, Environmental impact assessment
  7. Basics of Project Management
  8. Basics of Material Science and Engineering
  9. Information and Communication Technologies (ICT) based tools and their applications in Engineering such as networking, e-governance and technology-based education.
  10. Ethics and values in Engineering profession

Note: The paper in General Studies and Engineering Aptitude will include Knowledge of relevant topics as may be expected from an engineering graduate, without special study. Questions from all the 10 topics mentioned above shall be set. Marks for each Topic may range from 5% to 15% of the total marks in the paper.

2. Electronics & Telecommunication Engineering

Contents for syllabus of both the Papers together for Stage-I objective type Paper–II and separately for Stage-II Conventional type Paper-I and Paper – II

Books for IES 2018 How to Prepare for an IES Exam 2018 Books for GATE Preparation


  1. Basic Electronics Engineering:

Basics of semiconductors; Diode/Transistor basics and characteristics; Diodes for different uses; Junction & Field Effect Transistors (BJTs, JFETs, MOSFETs); Transistor amplifiers of different types, oscillators and other circuits; Basics of Integrated Circuits (ICs); Bipolar, MOS and CMOS ICs; Basics of linear ICs, operational amplifiers and their applications-linear/non-linear; Optical sources/detectors; Basics of Optoelectronics and its applications.

  1. Basic Electrical Engineering:

DC circuits-Ohm’s & Kirchoff’s laws, mesh and nodal analysis, circuit theorems; Electro-magnetism, Faraday’s & Lenz’s laws, induced EMF and its uses; Single-phase AC circuits; Transformers, efficiency; Basics- DC machines, induction machines, and synchronous machines; Electrical power sources- basics: hydroelectric, thermal, nuclear, wind, solar; Basics of batteries and their uses.

  1. Materials Science:

Electrical Engineering materials; Crystal structure & defects; Ceramic materials-structures, composites, processing and uses; Insulating laminates for electronics, structures, properties and uses; Magnetic materials, basics, classification, ferrites, ferro/para-magnetic materials and components; Nano materials-basics, preparation, purification, sintering, nano particles and uses; Nano-optical/magnetic/electronic materials and uses; Superconductivity, uses.

  1. Electronic Measurements and Instrumentation:

Principles of measurement, accuracy, precision and standards; Analog and Digital systems for measurement, measuring instruments for different applications; Static/dynamic characteristics of measurement systems, errors, statistical analysis and curve fitting; Measurement systems for non-electrical quantities; Basics of telemetry; Different types of transducers and displays; Data acquisition system basics.

  1. Network Theory:

Network graphs & matrices; Wye-Delta transformation; Linear constant coefficient differential equations- time domain analysis of RLC circuits; Solution of network equations using Laplace transforms- frequency domain analysis of RLC circuits; 2-port network parameters-driving point & transfer functions; State equations for networks; Steady state sinusoidal analysis.

  1. Analog and Digital Circuits:

Small signal equivalent circuits of diodes, BJTS and FETs; Diode circuits for different uses; Biasing & stability of BJT & JFET amplifier circuits; Analysis/design of amplifier- single/multi-stage; Feedback& uses; Active filters, timers, multipliers, wave shaping, A/D-D/A converters; Boolean Algebra& uses; Logic gates, Digital IC families, Combinatorial/sequential circuits; Basics of multiplexers, counters/registers/ memories /microprocessors, design& applications.


  1. Analog and Digital Communication Systems:

Random signals, noise, probability theory, information theory; Analog versus digital communication & applications: Systems- AM, FM, transmitters/receivers, theory/practice/ standards, SNR comparison; Digital communication basics: Sampling, quantizing, coding, PCM, DPCM, multiplexing-audio/video; Digital modulation: ASK, FSK, PSK; Multiple access: TDMA, FDMA, CDMA; Optical communication: fibre optics, theory, practice/standards.

  1. Control Systems:

Classification of signals and systems; Application of signal and system theory; System realization; Transforms& their applications; Signal flow graphs, Routh-Hurwitz criteria, root loci, Nyquist/Bode plots; Feedback systems-open &close loop types, stability analysis, steady state, transient and frequency response analysis; Design of control systems, compensators, elements of lead/lag compensation, PID and industrial controllers.

  1. Computer Organization and Architecture:

Basic architecture, CPU, I/O organisation, memory organization, peripheral devices, trends; Hardware /software issues; Data representation& Programming; Operating systems-basics, processes, characteristics, applications; Memory management, virtual memory, file systems, protection & security; Data bases, different types, characteristics and design; Transactions and concurrency control; Elements of programming languages, typical examples.

  1. Electro Magnetics:

Elements of vector calculus, Maxwell’s equations-basic concepts; Gauss’, Stokes’ theorems; Wave propagation through different media; Transmission Lines-different types, basics, Smith’s chart, impedance matching/transformation, S-parameters, pulse excitation, uses; Waveguides-basics, rectangular types, modes, cut-off frequency, dispersion, dielectric types; Antennas-radiation pattern, monopoles/dipoles, gain, arrays-active/passive, theory, uses.

  1. Advanced Electronics Topics:

VLSI technology: Processing, lithography, interconnects, packaging, testing; VLSI design: Principles, MUX/ROM/PLA-based design, Moore & Mealy circuit design; Pipeline concepts & functions; Design for testability, examples; DSP: Discrete time signals/systems, uses; Digital filters: FIR/IIR types, design, speech/audio/radar signal processing uses; Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing; Controllers & uses; Embedded systems.

  1. Advanced Communication Topics:

Communication networks: Principles /practices /technologies /uses /OSI model/security; Basic packet multiplexed streams/scheduling; Cellular networks, types, analysis, protocols (TCP/TCPIP); Microwave & satellite communication: Terrestrial/space type LOS systems, block schematics link calculations, system design; Communication satellites, orbits, characteristics, systems, uses; Fibre-optic communication systems, block schematics, link calculations, system design.

Click Here to Download PDF

IES Electronics


The following changes will be implemented from ESE 2017

  1. Two tier examination patterns will be changed to 3 tier system which includes Preliminary/Stage-I (Objective Type Papers), Mains/Stage-II (Conventional Type Papers) and Personality Test which will make the screening process of huge number of candidates easier.
  2. Only those candidates qualifying the Preliminary/Stage-I will be permitted to appear for Mains/Stage-II
  3. 2017 will include General Studies and Engineering Aptitude Paper which was only General ability paper before. History, Geography and Life Science has been removed from ESE 2017 syllabus.
  4. English is completely removed.
  5. Weightage of conventional papers has been increased by 100 marks.
  6. Weightage of objective papers has been reduced by 100 marks.
  7. From 2017 the ESE paper will be of 1100 marks (written-objective+conventional) and 200 marks (personality test) which will make the total as 1300 which was 1200 marks earlier.

ies electronics engineering syllabus 2017, syllabus of ies for electronics and communication engineering pdf,  for ece pdf,  for electronics and telecommunication pdf,  for electronics and communication pdf,  for electronics and telecommunication engineering, engineering,  syllabus,ies syllabus for electronics , study material for , electronics , ies study material for electronics and communication , ies syllabus for electronics and communication , syllabus of ies electronics , , ies electronics and telecommunication , ies syllabus for electronics and communication 2017 , syllabus , ies syllabus electronics , ies electronics , , ies syllabus for electrical and electronics engineering , ies notes for electronics and communication , ies syllabus for electronics and instrumentation engineering , , , pdf , ies study material for electronics and communication pdf , how to prepare for ies electronics , ies syllabus for electronics and communication pdf , ies syllabus for electronics and communication 2017 pdf , syllabus for electronics and communication , , , ies exam syllabus for electronics , how to prepare for ies exam electronics and communication , how to prepare for ies exam electronics , ias exam syllabus for electronics engineers , , ies exam syllabus for electronics and telecommunication , indian engineering services syllabus for electronics and telecommunication , ies electronics and telecommunication syllabus , upsc syllabus for electronics and telecommunication engineering , engineering services syllabus electronics telecommunication , upsc electronics and telecommunication syllabus , ies papers electronics and communication , ies previous year papers for electronics and telecommunication , , ies exam papers for electronics , ies previous year papers for electronics and communication , ies sample paper for electronics and communication , ies sample papers electronics , engineering services examination syllabus electronics , upsc engineering services syllabus for electronics , ias syllabus for electronics and communication engineering , ias syllabus for electronics and communication engineering pdf , indian engineering services syllabus for electronics and communication pdf , ies electronics syllabus , indian naval armament service electronics engineering posts ,


Enjoy this blog? Please spread the word :)

Follow by Email16k
Copy Protected by Chetan's WP-Copyprotect.